-Only One Set Per Customer Please-

Ms Bunnington is 154.94mm tall, 3D printed in multiple colors of PLA plastic:
- Comes with a prop chair to sit upon, with 3 different optional seat colors to choose from.
- Has 3 different sets of ear types: 'Flopped', 'Up and Ruffled', and 'Up and Pointy'
- Has 2 different sets of arms.
- Detachable tail that sockets into rear slot.
- 4 different sets of glasses for the top side of nose slot.
- Also comes with optional 3 stickers of her badge. (NOTICE: sticker may require double sided tape to stick better, sadly.)

Toby is 127mm tall, 3D printed in multiple colors of PLA plastic :

- His body features the ability to turn his head!

- Comes with a square standing pad.

(warning: there is apparently a risk with removing the figure from the pad, the feet may break off it not careful. i had this happen with 1 figurine even under what i felt was light effort. so i then modified the stand pegs to be thinner.)

Also comes with a container with all the parts!
box measures 147.32 x 57.15 x 36.83. has a pull able latch that keeps the glasses in place, within the container.

---

The model was produced by Feodaron_SD, while the pose was based on a concept drawing by Kitsuneyoukai with supervision.
Small adjustments to the model were made to optimize construction by Kitsuneyoukai.

(!) There may be defects in the figurines, such as small divots or bumps or residual support residue that was too difficult to remove in a timely and effective manner. Best efforts were made to keep those to a minimum and reduce them as production of the figurines continued. (!)